How to Configure Port Forwarding For Remote Desktop Port

5(1967)

3389 port forwarding How to Enable Port Forwarding on Windows with Netsh Portproxy? You can configure port forwarding in Windows using the Portproxy mode of the Netsh command. The command syntax is as follows: connectport – is a TCP port to which the connection from listenport is forwarded to..

port 3389 The port responsible for the Windows Remote Desktop service is 3389, i.e., you need to forward it to port 3389. If you or the PC you are connecting to is behind a router, you will first need to change the router’s settings to forward port 3389 from the router to the PC you’re connecting to.

port 3389 tcp You can also have a different port if you use port forwarding. The private port is 3389 as said above unless you change it, and the public port can be whatever. I have mine set to 10000, so when I connect using Remote Desktop Connection, I have to enter mycomputer.com:10000